Yokogawa Button Operated DX2000 - Manual (Page 165)

4-36
IM 04L42B01-01E
Progress Display When Saving All Data of the Internal Memory (Release Number
2 or Later)
If you carry out All Save* on the memory summary screen, a pop-up window appears
showing the progress of the save operation.
* Function for saving all data in the internal memory to a CF card or USB flash memory.
Note
• The pop-up window appears only when the memory summary display is showing.
• If you press the ESC key, the pop-up window clears temporarily and reappears
approximately 10 seconds later.
• The time estimate for saving all data is indicated in the table below (when the memory is full
of data). It may take longer depending on the operating conditions of the DX.
Save Destination Time to Save All Data
(Estimate)
CF Card USB Flash Memory
Standard memory (internal memory size suffix code
-3)
20 minutes 40 minutes
* Values for the DXs with firmware version 2.02 or later. Values inside the parentheses are
for the DXs with firmware version 2.01 or earlier.
• To abort the data saving operation in progress, carry out the procedure below.
Press
FUNC and press the Save Stop soft key.
• Displaying File Information (Only on DXs with the /AS1 advanced
security option)
See the Advanced Security Function (/AS1) User’s Manual, IM 04L41B01-05EN.
4.8 Using the Memory Summary