Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 34)

34
IM 04L31A01-02E
Manual Tuning
1. Press the arrow keys on the tuning display.
A cursor appears in the control parameter display section.
2. Select the control parameter you wish to change using the arrow keys .
3. Press the DISP/ENTER key .
The parameter modification pop-up window appears.
Control parameter
display section
Window for changing parameters
Cursor ( )
4. Change the value using the up and down arrow keys .
5. Press the DISP/ENTER key to confirm the changes.
To close the window without making any changes, press the ESC key .
Tuning Operation