Yokogawa PC-Based MX100 - Manual (Page 104)

3-23
IM MX180-01E
Vewer
3
2
1
4
5
App
Index
3.6 Savng the Dsplay Template
Procedure
Savng Templates
1. From the File menu, choose Save Template.
The currently displayed settings are saved as a template file to the same folder as the
displayed data.
Usng Templates
1. From the File menu, choose Use Template.
If the currently displayed data is not in the display conditions file, it is displayed according to
the setting information of the template file residing in the same folder.
If the currently displayed data is in the display conditions file, it is displayed according to the
setting information of the display conditions file.
Explanaton
The template file is saved with the name default.mxt in the folder of the currently
displayed data.
When using a template file, the template file residing in the same folder as the displayed
data is used.
The setting information saved to the template file is as follows.
• Information about the group whose waveform or numeric display is open.
• Settings entered using the tool buttons at the top section of the waveform display area
of each group.
Alarm display ON/OFF, magnification, scale, clip ON/OFF of the waveform display.
• General Display Settings on the View menu.
• Channel No., Tag ID, and Tag comment settings on the View menu.
• Absolute Time or Relative Time setting on the View menu.
• Graph/Sheet Layout setting on the Window menu.
• Check box items in the File Information dialog box on the Information menu.
The items are used as headers when the data is printed.
• Print setting on the File menu.
Range, Color, Print Groups, and Comment.
• Position of the display screen.