Yokogawa PC-Based MX100 - Manual (Page 36)

2-22 IM MX180-01E
Set the initial balance for strain input channels
(only when the input mode is set to STR)
Set the type for alarms 1 to 4, the setting value,
and the hysteresis (see section 2.9)
Set the Intal Balance for Stran Input Channels (Only When the Input Mode Is
Set to STR)
19. Under Strain function, click the Execute button under Initial balance or Reset.
The Executing Initial balancing dialog box appears, and Executing is displayed in the Status
box. When execution is complete, the result is displayed in the Status box.
2.4 Settng the Measurement Condtons (Settng the Measurement Channels)