Yokogawa PC-Based MX100 - Manual (Page 67)

2-53
IM MX180-01E
Integrat
on Mon
tor
3
2
1
4
5
App
Index
To clear the cursors, choose Hide Cursor from the View menu.
Choose
Explanaton
Pausng the Updatng of the Waveform Dsplay
While monitoring the waveform, you can pause the updating of the waveform display and
check the past waveforms (up to 1800 points).
Pausing the display on the numeric display holds the current values immediately before
the pause operation on display.
Readng Measured/Computed Values Usng Cursors
When the updating of the waveform display is paused, you can read values using
cursors. Two cursors can be displayed. Below are the values that can be read using
cursors.
• Values at the cursors.
• Difference in the value between the cursors.
• The time at the cursor position.
• The time between the cursors.
2.8 Pausng the Updatng of the Montor Dsplay and Readng Measured/Computed Values Usng Cursors