Yokogawa PC-Based MX100 User Manual
Page 80
Advertising
2-66
IM MX180-01E
Explanaton
Save Destnaton
The default save destination varies depending on the system that is running.
Fle Name
The extension is .mxp. The default file name is NewProject.mxp.
Creatng a New Project
Create a new project when you wish to monitor the measured/computed data using new
settings.
Prnted Contents of the Setup Data
The following figure show how the setup data is printed.
2.12 Savng/Loadng and Prntng Setup Data (Project)
Advertising