Chapter 4 calibrator, 1 connecting the mx100, Chapter 4 calbrator – Yokogawa PC-Based MX100 User Manual
Page 112: Connecting the mx100 -1, 1 connectng the mx100
Advertising
4-1
IM MX180-01E
Cal
brator
3
2
1
4
5
App
Index
4.1 Connectng the MX100
Notes before Usng the Calbrator
• If the MX100 is connected using the Integration Monitor, drop the connection before
connecting the MX100 using the Calibrator.
• If you change the module configuration before connecting with the Calibrator, use the
Integration Monitor to reconfigure the system (see section 2.2).
Procedure
1.
Start the Calibrator.
The Unit Information window opens.
2.
In the IP Address/Host Name box, enter the IP address or host name of the
MX100 to be calibrated.
3.
Click Connect.
Enter the IP address or host name of the
MX100 to be calibrated.
Execute connection
Chapter 4
Calbrator
Advertising