Yokogawa µR20000 - Manual (Page 18)

2-2
IM 04P01B01-17E
2.2 Connecting the Ethernet Interface
When Connecting Only the Recorder and a PC
Connect the recorder and the PC via a HUB as in the following figure.
Hub
µ R10000/µR20000 Recorder
µ R10000/µR20000 Recorder
PC
10BASE-T
straight cable
10BASE-T
straight cable
When Connecting to a Preexisting Network
The following figure illustrates an example in which a recorder and a PC are connected
to the network. When connecting the recorder or the PC to a preexisting network, the
transfer rate, connector type, etc. must be matched. For details, consult your system or
network administrator.
Hub, router, etc.
Network
µ R10000/µR20000 Recorder
PC
10BASE-T
straight cable
Note
• Depending on the reliability of the network or the volume of network traffic, all the transferred
data may not be retrieved by the PC.
• Communication performance deteriorates if multiple PCs access the recorder
simultaneously.