GW Instek PSU-Series User Manual - Manual (Page 107)

CONFIGURATION
107
Power On Configuration Settings
CV Control Sets the constant voltage (CV) control mode
between local and external voltage/resistance
control. For external voltage control, see page
118 (External Voltage Control of Voltage
Output) and page 123 (External Resistance
Control of Voltage Output). For Isolated
control, see page 140 for details.
F-90 0= Control by local
1 = Control by external voltage
2 = Control by external resistor -
rising
3 = Control by external resistor-
falling
4 = Control by isolated board
CC Control Sets the constant current (CC) control mode
between local and external voltage/resistance
control. For details on external voltage control,
see page 121 (External Voltage Control of
Current Output) and 125 (External Resistance
Control of Current Output). For Isolated
control, see page 140 for details.
F-91 0 = Control by local
1 = Control by external voltage
2 = Control by external resistor -
rising
3 = Control by external resistor-
falling
4 = Control by isolated board
Output Status
when Power-ON
Output Sets the power supply to turn the output on or
off at power up.