Psu series user manual, Vmon connection, Pin6 (+vmon_iso) → pos (+) – GW Instek PSU-Series User Manual User Manual
Page 154: Pin5 (gnd_iso) → neg (-) imon connection, Pin7(+imon_iso) → pos (+)
PSU Series User Manual
154
VMON
Connection
PSU
DMM
Isolated
Voltage
or
Current
Option
5
6
Output
Terminal
V MON
0
→10V
or
0
→5V
or
4
mA→ 20mA
Pin6 (+VMON_ISO) → Pos (+)
Pin5 (GND_ISO) → Neg (-)
IMON
Connection
PSU
DMM
Isolated
Voltage
or
Current
Option
5
7
Output
Terminal
I MON
0
→10V
or
0
→5V
or
4
mA→ 20mA
Pin7(+IMON_ISO) → Pos (+)
Pin5(GND_ISO) → Neg (-)
Steps
1. Connect the external voltage or external current
source to the isolated voltage or current option
according to the connection diagrams above.
2. If using the isolated voltage option,
set the F-96 settings to 0 (0~5V) or
1 (0~10V) to choose the VMON or
IMON output range.
Page 111
3. If using the isolated current option,
set the F-96 power on
configuration setting to 1 to set the
VMON and IMON output to 4mA
~ 20mA.
Page 111
Be sure to cycle the power after the power
on configuration has been set.