GW Instek PSU-Series User Manual - Manual (Page 14)

PSU Series User Manual
14
Appearance
PSU Series Front Panel
Lock/ Local PROT Function Test Set Output
Unlock ALM_CLR M 1 M 2 M 3
Shift
: Long Push
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C C
A
C V
V
VOLTAGE CURRENT
PSU 40-38
DC Power Supply
0 - 40 V / 0 - 38A
Voltage Current
2 3 4 5
Display Area
1
11 6 7 8 9 10 12 13
1. Power Switch Used to turn the power on/off.
2. USB A Port USB A port for data transfer,
loading test scripts etc.
3. Air Inlet Air inlet for cooling the inside of
the PSU series.
4. Voltage Knob
Voltage
Used to set the voltage value or
select a parameter number in the
Function settings.
Display Area The display area shows setting values, output
values and parameter settings. The function LEDs
below show the current status and mode of the
power supply. See page 17 for details.
5. Current Knob Current
Used to set the current value or
change the value of a Function
parameter.