Communication menu – Badger Meter M-Series M1000 User Manual
Page 28
Miscellaneous Menu
Miscellaneous
Log
Off, On and Preset
Power Up
The number of times that the unit has been powered on .
Settling Time
Measures settling of coils and must be less than one quarter of the excitation period . Zero ms if no
detector is connected .
Language
This parameter allows changing the current language . English is the default setting .
The following languages are supported:
German (Deutsch), Czech (Cestina), Spanish (Espanol), French (Francais), Russian (России),
Italian (Italiano) .
Date
Set date of the system in the format day, month, year [DD .MM .YY] used for data logging .
Time
Set time of the system in the format hour, minutes, seconds [HH .MM .SS] used for data logging .
EEPROM
Delete all data logging information from the EEPROM .
Polar Voltage
Measure electrode polarizing voltage in ± V (only for service purpose) .
Display Rotation The Display can be rotated to 0°, 90°, 180° and 270° .
Contrast
The contrast of the display can be adjusted between 14 (low) and 49 (high) .
Datalog Period
The data logging period can be adjusted to the following increments:
• Every 15 min / 1 h / 6 h / 12 h / 24 h
There is a 500 kB memory with about 30,000 data records for data logging available . The logging
capacity is as following (Unidirectional mode):
Time Period
Duration
15 min
up to 312 days
1 h
up to 1250 days
6 h
up to 20 years
12 h
up to 40 years
24 h
up to 80 years
Startup, configuration, and error events that are logged can reduce the data logging capacity . Logging
in bidirectional mode reduces the logging capacity by about 40% .
The logging information can be downloaded by a PC program, which can be ordered with the
following part number: 67354-010 .
Information Menu
Info
Serial Number
Serial number of the electronic board .
Version
Software version of the device .
Compilation Date Date of the software version .
OPT CRC
Checksum of the software update .
APP CRC
Checksum of the application .
M1000 main menu programming options
Page 28
July 2014
MAG-UM-00379-EN-02