Test communication (dk) menu, Select ini cnf dk rep, Test all dks yes / no – Badger Meter Fluid Management System User Manual
Page 14: Start dkpd test press enter, Results 1-16 ook
Test Communication (DK) Menu
Select
INI CNF DK REP
The DK menu is used to check the communication between
all keypads .
Test All DKs
YES / NO
Use the Scroll key to move the cursor to either YES or NO and press
ENTER .
Three Dispense Keypads are set up in the following example . Each "–" (dash) stands for a Dispense Keypad .
Start DKpd Test
Press Enter
Press ENTER to begin the test .
Results 1-16
OOK-------------
Keypad 3 - No Connection
Keypad 2 - Detected
Keypad 3 - Detected
N=Network Error, T=Timeout
Three Dispense Keypads are set up in this example .
In the following examples, each "–" (dash) stands for a
Dispense Keypad . Press ENTER to display these results .
Results 17-32
----------------
Results 33-36
----
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 14
July 2014