Badger Meter Fluid Management System - Manual (Page 50)

The default view shows all work orders that
have been completed on that day . If you have a
work order completed you will see it listed in the
screen to the left:
The columns across the top show:
•
the work order ID number assigned,
• date and time the fluid was dispensed,
• the quantity of fluid actually dispensed,
• the quantity that was preset on the work order,
• the user who dispensed the fluid,
• the type of fluid dispensed,
• the hose the fluid was dispensed from,
• the status of the work order, and
• whether the work order has been reviewed .
Reviewing a Work Order
To mark a work order as reviewed, check the box below Reviewed and press ENTER .
Locating a Work Order
To locate a work order, you may search by user, work order ID, hose ID, fluid type, or date range .
To search, enter your criteria in the appropriate text boxes and click NEW SEARCH . To clear the search criteria, click RESET .
Changing the Unit of Measure
At the bottom of the screen, there are total fluid numbers and records counts . This will sum the total amount of fluid that has
been dispensed for the records currently appearing on the search . You may change the unit that the fluid is summed in by
selecting the drop-down menu next to Unit and choosing from Liters, Gallons, Pints, and Quarts .
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 50 July 2014