Badger Meter Fluid Management System - Manual (Page 31)

Changing the Battery
When the batteries need changing, a progression of warnings appears on the meter screen .
First Warning
The Low Battery icon appears in the lower left corner of the display . That means the
batteries are low and need to be changed when the icon appears .
Second Warning
The Battery icon flashes . The battery power is too low and meter functions are disabled .
The battery compartment is located in the lower case on the backside of the trigger guard .
1 . Position the unit face down .
2 . Unscrew the two screws . Remove the battery door to expose the batteries .
3 . Replace the old batteries with 4 AA alkaline batteries .
OTEE: N Battery polarity markings are inside battery compartment .
4 . Dispose of used batteries properly, according to local regulations .
OTEE: N Changing the batteries does not affect any of the programmed values
or totals .
Programming the EPM-3 RF Meter
The units of measurement and scale factor can be changed . For instructions, see the EPM-3 RF Meter Installation and Operation
Manual .
User Manual
Page 31 July 2014