Badger Meter Fluid Management System - Manual (Page 24)

Network Connect (CON) Menu
The Network Connect forces the keypad to connect to a new Master Keypad network . This option is used when:
•
Replacing the Master Keypad .
• Moving the Dispense Keypad if the Dispense Keypad does not automatically find the new network .
Select
ADR NWK PWR STA
Select
CON ... ... ...
1 . Use the SCROLL key to move the cursor to CON .
2 . Press ENTER to display the Radio Network screen .
RADIO NETWORK
CONNECTING
3 . Press ENTER to display the Radio Status screen .
RADIO STATUS
NWK CONNECTED
4 . The screen displays the radio connection status (NWK CONNECTED
or NWK DOWN) .
System Override (SYS) Menu
Select
LNK RAD SYS ...
The System Override Menu is used to override verification of the Master
Keypad .
System Override
YES / NO
1 . Use the SCROLL key to move the cursor to YES .
2 . Press ENTER .
System Override
ON
The screen verifies that System Override is On .
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 24 July 2014