Badger Meter Fluid Management System - Manual (Page 28)

EPM-3 RF METER
The meter is equipped with RF communications to communicate dispense authorization and result information . Once a work
order has been set up, the operator simply pulls the trigger and the authorized amount of fluid for that meter will dispense .
The valve will automatically shut off when the full quantity has been dispensed . A Top Off feature allows additional quantities
to be dispensed and tracked after the valve closes . Upon completion of the dispense effort, the valve locks, prohibiting any
unauthorized dispense .
Key Description
The following keys (except for RESET and SHUT-OFF) are only active in the AUTO mode (or Manual mode) .
10, 1, 0.1 Used to enter the dispense quantity to be used .
In operational mode it shows the five latest
dispensed amounts .
TOTAL Used to display the accumulated total of fluid
dispensed, as well as the resettable total when
held for 3 seconds .
AUTO Used to enter and exit the auto mode when RF
communications are not available .
RESET • Used to accept a dispense order from the
keypad .
• Used in normal operating mode (RF, manual
or auto) to clear the previously programmed
batch and to reset the meter .
• Used to reset the resettable total dispensed
while pressing the TOTAL button .
SHUTOFF
or
STOP
Used to stop the flow manually through an
electrical override .
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 28 July 2014