Badger Meter Fluid Management System - Manual (Page 22)

RF Communication Test (LNK) Menu
Select
LNK RAD SYS ...
The LNK Menu is used to check the quality of the RF communication
between the Master and Dispense Keypads .
The test performs a number of test communications and measures the quantity of lost transmissions . The Link Quality 10 is the
maximum you can achieve .
Start Link Test
Press Enter
Test in
Progress
Test Complete
Link Quality: 10
Enter to Cancel
Press Enter
Radio (RAD) Menu
The RAD menu screens are:
•
Address (ADR) toggles the display between the Radio Address and the Radio Prefix screens .
• Network (NWK) allows you to select the Radio Network .
• Power (PWR) displays the radio’s transmit (Tx) output power .
• Status (STA) displays the Radio Network Status .
• Network Connect (CON) connects the keypad to a new Master Keypad network .
Select
INI CNF MET REP
1 . Use the SCROLL key to move the cursor to REP .
Select
LNK RAD SYS ...
2 . Press SCROLL two more times to move the cursor to the RAD
selection .
3 . Press ENTER to display the RAD screen .
Select
ADR NWK PWR STA
4 . Use the SCROLL key to move the cursor to the information you
want to display .
5 . Press HOME to go back to the default screens .
Radio Address/Radio Prefix
Once you select ADR, you can use the Scroll key to toggle between the Radio Address and the Radio Prefix screens .
Select
ADR NWK PWR STA
1 . Use the SCROLL key to move the cursor to ADR .
RADIO PREFIX
00:0D:6F:00
2 . Press SCROLL again to display the Radio Prefix screen .
Fluid Managment System, FMS-3 2.4 GHz RF High-End Software v3.4.1
Page 22 July 2014