Badger Meter Fluid Management System User Manual
Page 41
Creating a New Fluid
11 . If the fluid you entered during the Add Tank procedure was not in the drop-
down list, click YES if you want to create a new fluid .
The new fluid will now appear in the Fluid Type drop-down list .
After you set up a tank and fluid(s), the software
displays graphical representation of the tank
level, including:
•
the percentage of fluid remaining in the tank .
•
the tank information that was entered in the
previous step .
To change the information, click on EDIT .
To add a new tank, click on ADD TANK and
repeat the process explained in
To track when fluid is added to the tank, click on
FLUID DELIVERY .
You can edit the amount of fluid added and the units in which it was added
(gallons, liters, pints, and quarts) .
After entering the information, click SAVE to save your changes .
You will be asked to verify your changes .
When the verification screen appears, click OK .
User Manual
Page 41
July 2014