NORD Drivesystems BU0530 - Manual (Page 4)

Functional safety with NORD SK 500E frequency inverters About this document
4 BU 0530 GB-3712
Intended use of the frequency inverter
Compliance with the operating instructions is necessary for fault-free operation and the
acceptance of any warranty claims. These operating instructions must be read before
working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
SK 500E series frequency inverters are devices for industrial and commercial systems used
for the operation of three-phase asynchronous motors with squirrel-cage rotors and
Permanent Magnet Synchronous Motors - PMSM (SK 54xE and above). These motors must
be suitable for operation with frequency inverters, other loads must not be connected to the
devices.
SK 500E frequency inverters are devices for stationary installation in control cabinets. All
details regarding technical data and permissible conditions at the installation site must be
complied with.
Commissioning (implementation of the intended use) is not permitted until it has been
ensured that the machine complies with the EMC directive 2004/108/EEC and that the
conformity of the end product meets the machine directive 2006/42/EEC (note EN 60204).

Getriebebau NORD GmbH & Co. KG, 2012