NORD Drivesystems BU0080 - Manual (Page 24)

NORDAC DeviceNet Manual
24 BU 0080 GB
Parameter Setting value / Description / Note Comments
P741 ... - 01
…
... - 13
Process data bus Out SK 500E
... - 01 = Status word
Status word, source from
P509.
... - 02 = Actual value 1 (P543)
... - 03 = Actual value 2 (P544)
... - 04 = Actual value 3 (P545)
... - 05 = Bus I/O Out Bits (P481)
The displayed value
depicts all Bus In bit
sources linked with OR.
… - 06 = Parameter data Out 1
... - 07 = Parameter data Out 2
... - 08 = Parameter data Out 3
... - 09 = Parameter data Out 4
... - 10 = Parameter data Out 5
Data during parameter
transfer.
0000 ... FFFF (hex) This parameter provides
information about the actual
status word and the actual
values that are transferred via
the bus systems.
... - 11 = Master function actual value 1
... - 12 = Master function actual value 2
... - 13 = Master function actual value 3
Actual value of master
function 502/P503.
P742 Database version
0 ... 9999 Displays the internal database version of the FI.
P744 Configuration SK 300E, SK 700E, SK 750E
This parameter displays the option modules detected by the FI.
The display with the ParameterBox is in plain text.
The possible combinations are displayed in code in the ControlBox. Both right digits indicate the
customer unit used and the two left digits indicate the special extension unit. The options vary
depending on the FI type.
Customer Unit SK CU1-… Special extension unit SK XU1-...
0 ... 9999
No IO XX00
Basic IO XX01
Standard IO XX02
Multi IO XX03
USS IO XX04
CAN IO XX05
Profibus IO XX06
Encoder 01XX
PosiCon 02XX
P744 Configuration SK 500E
This parameter displays the design status integrated in the FI. Display is in hexadecimal code
(SimpleBox, ControlBox, Bus system).
The display is in plain text when the ParameterBox is used.
0000 ... FFFF (hex)
SK 500E = 0000
SK 510E/511E/515E = 0000
SK 520E = 0101 SK 530E/535E = 0201
P745 Module version SK 300E, SK 500E
0.0 ... 3276.7 Design status (software version) of the technology unit (SK TU2/3-xxx), but only when a separate
processor is present, therefore not for SK TU2/3-CTR.
Have this data available if you have a technical query.