NORD Drivesystems BU0090 - Manual (Page 12)

NORDAC AS-Interface Manual
12 BU 0090 GB
2.2 NORDAC SK 700E
By the use of different modules for display, control and parameterisation, the NORDAC SK 700E can be easily
adapted to various requirements.
Alphanumerical display and operating modules can be used for simple commissioning. For more complex
tasks, various connections to a PC or an automation system can be selected.
The technology unit (Technology Unit, SK TU1-…) is connected externally to the front of the frequency
inverter and is therefore easy to access and replace at any time.
In addition, further modules (customer interfaces and special extensions) can be used in the frequency inverter
for the processing of digital and analogue signals and for speed control or positioning.
WARNING
NOTE
Modules should not be inserted or removed unless the device is free of voltage. The slots may
only be used for the intended modules.
Installation of a technology unit separate from the frequency inverter is not possible. It must be
connected directly to the frequency inverter.