NORD Drivesystems BU0090 - Manual (Page 4)

NORDAC AS-Interface Manual
4 BU 0090 GB
Intended use of the frequency inverter
Compliance with the operating instructions is necessary for fault-free operation and the
acceptance of any warranty claims. These operating instructions must be read before
working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
The AS interface module can only be used with the particular defined frequency inverter
series. Use with different series is only possible with the SK TU2-... module with SK 300E
and SK 750E. The use of these modules with other devices is not permitted and can lead to
their destruction.
The AS interface module and the associated frequency inverters are devices for fixed
installation in switching cabinets or decentralised units. All details regarding technical
data and permissible conditions at the installation site must be complied with.
Commissioning (implementation of the correct use) is not permitted until it has been ensured
that the machine complies with the EMC directive 204/108/EEC and that the conformity of the
end product meets the machine directive 2006/42/EEC (note EN 60204).
© Getriebebau NORD GmbH & Co. KG, 2010