UEi Test Instruments KM9106/P - Manual (Page 18)

KM9106 Operators Manual 18
they drift. This may happen if the sensor is taken to very high
concentrations for long periods of time or over-ranged.
6.1 Time and Date (Setting numbers)
This section gives details on setting the time and date and also the general principle of
setting a number from 0-9 used in other functions.
TO SET THE TIME AND DATE
Press the followed by
UPPER FUNCTION key -- -- -- -- -- -- -- -- -- -- -- -- --
UPPER FUNCTION
SET
-- -- -- -- -- -- -- -- -- -- -- -- --
Pressing the key displays
DAY - MONTH - YEAR
SELECT ORDER
Parameter
Controls Options
DATE
FORMAT: Select using or key and
DAY-MONTH-
YEAR
MONTH-DAY-
YEAR
To Set The Date:
DATE 26-01-97
SET
Each number in the date is to be set. The cursor _ under the two in the DAY above
indicates this number can be changed. Set each number in the date until correct using
the method below, this is also the method for SETTING NUMBERS.
Parameter
Controls Options
DATE: Select each number using or
key and
0 - 9
The cursor _ moves to each number in turn
until the last number is set.
DATE 26-01-97
SET
TIME
SET/CAL
ENTER
ENTER