UEi Test Instruments KM9106/P - Manual (Page 34)

KM9106 Operators Manual 34
7.2 User Defined Printouts
General Principle: A user defined printout can have a maximum of 40 lines. The
contents of each line can be defined by the user from the master list of parameters
detailed later in this section. The standard printout with line numbers and parameter
numbers is given later in this section as an example. To define a printout you must
allocate a parameter number to each line. The printout must be terminated with a line
of hashes.
Select YES to configure your own
printout.
USER PRINTOUT ?
YES
SET LINE . . . . . . ?
NO
If you have previously configured a printout select NO, selecting YES will allow the
first line of the printout to be changed.
SET LINE . . . . . . 1
7 7 KANE MAY 7 7
Use or keys to select the required line and press
In this example the Time has been
selected for the first line.
SET LINE . . . . . . 1
TIME 10:32:36
Repeat the process for the second line
and so on.
SET LINE . . . . . . 2
O2 % . . . . . . . 11.2
End the printout with a line of hashes.
SET LINE . . . . . . 3
# # # # # # # # # # # # #
ENTER