Brother HL-S7000DN - Manual (Page 100)

Wireless network terms and concepts
94
10
Note
• IEEE 802.11n does not support WEP or TKIP for the encryption method.
• If you want to connect to your wireless network using IEEE 802.11n, we recommend to choose AES.
Network Key
10
 Open system/Shared key with WEP
This key is a 64-bit or 128-bit value that must be entered in an ASCII or hexadecimal format.
• 64 (40) bit ASCII:
Uses 5 text characters. e.g. “WSLAN” (this is case sensitive)
• 64 (40) bit hexadecimal:
Uses 10 digits of hexadecimal data. e.g. “71f2234aba”
• 128 (104) bit ASCII:
Uses 13 text characters. e.g. “Wirelesscomms” (this is case sensitive)
• 128 (104) bit hexadecimal:
Uses 26 digits of hexadecimal data. e.g. “71f2234ab56cd709e5412aa2ba”
 WPA-PSK/WPA2-PSK and TKIP or AES
Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
Authentication and Encryption methods for an enterprise wireless network
10
An enterprise wireless network is a large network, for example using your machine in a business enterprise
wireless network, with IEEE 802.1x support. If you configure your machine in an IEEE 802.1x supported
wireless network, you can use the following authentication and encryption methods.
Authentication methods
10
 LEAP
For LEAP, see LEAP (For wireless network) uu page 90.
 EAP-FAST
For EAP-FAST, see EAP-FAST uu page 90.
 PEAP
For PEAP, see PEAP uu page 90.
 EAP-TTLS
For EAP-TTLS, see EAP-TTLS uu page 90.
 EAP-TLS
For EAP-TLS, see EAP-TLS uu page 91.