Brother HL-S7000DN - Manual (Page 58)

Web Based Management
52
5
• The Username
1
and Password in Authentication Setting are correct.
1 If the username is part of a domain, please input the username in one of the following styles: user@domain or domain\user.
• The time of the log file server matches the time from the SNTP server, or the Date&Time settings.
• The SNTP time server settings are configured correctly so the time matches the time used for
authentication by Kerberos or NTLMv2. If there is no SNTP server, make sure the Date&Time and Time
Zone settings are set correctly using the control panel so the machine matches the time being used by
the server providing the authentication.
 File Access Error, contact your administrator.
This message will appear when you cannot access the destination folder.
Make sure that:
• The directory name is correct.
• The directory is write-enabled.
• The file is not locked.
 Wrong Date&Time, contact your administrator.
This message will appear when your machine does not obtain the time from the SNTP time server. Make
sure that:
• Confirm the settings to access the SNTP time correctly using Web Based Management.
• In Web Based Management, confirm the Date&Time settings of your machine is correct.
Note
If you choose the Cancel Print option in Web Based Management the Log Access Error message will
remain on the LCD for about 30 seconds.