Brother HL-S7000DN - Manual (Page 29)

Configuring your machine for a wireless network
23
3
f
When the LCD shows
Start WPS/AOSS on your wireless access point/router. Then press OK., press the
WPS or AOSS™ button on your wireless access point/router. See the user's guide for your wireless
access point/router for instructions.
Then press OK and your machine will now automatically detect which mode (WPS or AOSS™) your
wireless access point/router uses and try to connect to your wireless network.
g
If your wireless device is connected successfully, the display shows Connected.
The machine will print your machine's wireless status report. If the connection failed, check the error
code on the printed report and refer to uu Quick Setup Guide: Troubleshooting.
(Windows ® )
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Install Printer Driver from the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Start Here OSX from the CD-ROM menu.