Brother HL-S7000DN - Manual (Page 46)

Control panel setup
40
4
Network
(continued) Wired LAN
(continued) MAC Address — —
Set to Default Restores wired network settings of the internal print server
to the factory default.
Wired Enable — On*
Off
WLAN TCP/IP Boot Method Auto*
Static
RARP
BOOTP
DHCP
IP Address
(000.000.000.000)*
1
Subnet Mask
(000.000.000.000)*
1
Gateway (000.000.000.000)
Node Name BRWXXXXXXXXXXXX= (last 6
figures of your machine’s MAC
Address / Ethernet Address)
(up to 32 characters)
WINS Config Auto/Static
WINS Server Primary/Secondary
[000].[000].[000].[000]
DNS Server Primary/Secondary
[000].[000].[000].[000]
IP Boot Tries 0/1/2/3*.../32767
APIPA On*
Off
IPv6 On
Off*
Setup Wizard — —
WPS/AOSS — —
WPS w/PIN Code — —
Main menu Submenu Menu Selections Options