Brother HL-S7000DN - Manual (Page 56)

Web Based Management
50
5
 Auth. Method
Choose the authentication method required for access to the CIFS server Auto, Kerberos
1
or
NTLMv2
2
.
1 Kerberos is an authentication protocol which allows devices or individuals to securely prove their identity to network servers using a
single sign-on.
2 NTLMv2 is the authentication method used by Windows ® to log into servers.
• Auto: If you choose Auto, the machine will initially search for a Kerberos server. If the Kerberos
server is not detected, NTLMv2 will be used for the authentication method.
• Kerberos: Choose Kerberos, to use Kerberos Authentication only.
• NTLMv2: Choose NTLMv2, to use NTLMv2 Authentication only.
For Kerberos and NTLMv2 Authentication you must also configure the Date&Time settings or
the SNTP protocol (network time server).
For configuring the SNTP settings, see How to configure the SNTP protocol using Web Based
Management uu page 48.
You can configure the Date&Time settings from the machine’s control panel.
 Username
Enter the Username for the authentication up to 96 characters.
Note
If the username is part of a domain, please input the username in one of the following styles: user@domain
or domain\user.
 Password
Enter the password for the authentication (up to 32 characters).
 Kerberos Server Address (if needed)
Enter the KDC Host Address (for example: mypc.example.com) (up to 64 characters) or the IP
address (for example: 192.168.56.189).
d
In the Connection Status, you can confirm the last log status. For more information, see Understanding
Error Messages uu page 51.
e Click Submit to apply your settings.
Error Detection Setting
5
You can choose what action is taken when the print log cannot be stored to the server due to a network error.