Brother HL-S7000DN - Manual (Page 62)

Security features
56
6
Secure Management using BRAdmin Professional 3
(Windows
®
)
6
To use the BRAdmin Professional 3 utility securely, you need to follow the
points below
6
 We strongly recommend to use the latest version of the BRAdmin Professional 3 utility that is available as
a download from http://solutions.brother.com/. If you use an older version of BRAdmin
1
to manage your
Brother machines the user authentication will not be secure.
 If you want to avoid access to your machine from older versions of BRAdmin
1
, you need to disable the
access from older versions of BRAdmin
1
from Advanced Setting of SNMP on Protocol page using Web
Based Management.
 If you use BRAdmin Professional 3 and Web Based Management together, use Web Based Management
with the HTTPS protocol. (See Secure Management using Web Based Management (web browser)
uu
page 55.)
 If you are managing a mixed group of older print servers
2
and print servers with BRAdmin Professional 3,
we recommend using a different password in each group. This will ensure security is maintained on the
new print servers.
1 BRAdmin Professional older than Ver. 2.80, BRAdmin Light for Macintosh older than Ver. 1.10
2 NC-2000 series, NC-2100p, NC-3100h, NC-3100s, NC-4100h, NC-5100h, NC-5200h, NC-6100h, NC-6200h, NC-6300h, NC-6400h, NC-8000,
NC-100h, NC-110h, NC-120w, NC-130h, NC-140w, NC-8100h, NC-9100h, NC-7100w, NC-7200w, NC-2200w
a
Start your web browser.
b
Type machine's IP address into your browser. (If you use the created certificate, type "https:// Common
Name/" into your browser, where “Common Name” is the Common Name that you assigned for the
certificate, such as an IP address, node name or domain name. For how to assign a Common Name for
the certificate, see Using Certificates for device security uu page 65.)
 For example:
https://192.168.1.2/ (if the Common Name is the machine’s IP address)
c
No password is required by default. Enter a password if you have set one and press .
d You can now access the machine using HTTPS.
If you use the SNMPv3 protocol, follow the steps below.
Note
You can also change the SNMP settings by using BRAdmin Professional 3.
e
Click Network.
f
Click Protocol.
g
Make sure that the SNMP setting is enabled, and then click Advanced Setting of SNMP.