Brother HL-S7000DN - Manual (Page 22)

Configuring your machine for a wireless network
16
3
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Install Printer Driver from the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing the
printer driver, please choose Start Here OSX from the CD-ROM menu.
Configuring your machine when the SSID is not broadcast
3
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
1 TKIP is supported for WPA-PSK only.
Note
If your access point/router uses WEP encryption, enter the key used as the first WEP key. Your Brother
machine supports the use of the first WEP key only.
b Press Menu.
c
Press a or b to choose Network.
Press OK.
d Press a or b to choose WLAN.
Press OK.
Network name: (SSID)
Communication Mode Authentication method Encryption mode Network Key
Infrastructure Open system NONE —
WEP
Shared key WEP
WPA/WPA2-PSK AES
TKIP
1
For example:
Network name: (SSID)
HELLO
Communication Mode Authentication method Encryption mode Network Key
Infrastructure WPA2-PSK AES 12345678