Brother HL-S7000DN - Manual (Page 47)

Control panel setup
41
4
1 On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
Network
(continued) WLAN
(continued) WLAN Status Status Active(11n)
Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
AOSS Active
Connection Fail
Signal (Appears only when
WLAN Enable is On.)
Channel
Speed
SSID
Comm. Mode
Ad-hoc
Infrastructure
MAC Address — —
Set to Default Restores wireless network settings of the internal print
server to the factory default.
WLAN Enable — On
Off*
Security IPsec — On
Off*
Network Res
et Restores all network settings of the internal print server to the factory default.
Main menu Submenu Menu Selections Options