Brother HL-S7000DN - Manual (Page 63)

Security features
57
6
h
You can configure the SNMP settings from the screen below.
We have three SNMP connection modes of operation.
6
 SNMP v1/v2c read-write access
In this mode the print server uses version 1 and version 2c of the SNMP protocol. You can use all Brother
applications under this mode. However, it is not secure since it will not authenticate the user and the data
will not be encrypted.
 SNMPv3 read-write access and v1/v2c read-only access
In this mode the print server uses the read-write access of version 3 and the read-only access of version 1
and version 2c of the SNMP protocol.
Note
When you use the SNMPv3 read-write access and v1/v2c read-only access mode, some Brother
applications (e.g. BRAdmin Light) that access to the print server do not work properly since they authorize
the read-only access of version 1 and version 2c. If you want to use all applications, use the
SNMP v1/v2c read-write access mode.
 SNMPv3 read-write access
With this mode the print server uses version 3 of the SNMP protocol. If you want to manage the print server
securely, use this mode.
Note
• When you use the SNMPv3 read-write access mode, please note the following.
• You can manage the print server by using BRAdmin Professional 3 or Web Based Management only.