Canon imagePROGRAF iPF8400S - Manual (Page 107)

iPF8400S Basic Guide
107
Tro
ubl
esho
otin
g
P
rob
lem
s Reg
ard
ing Pap
er
7 If the Carriage is on the left, move the Carriage
to the right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error
may occur when you turn on the printer.
8 Lower the Release Lever and close the Top
Cover.
9 Turn the printer on. (See "Turning the Printer On and Off.")➔User's Guide
Roll paper cannot be inserted into the paper feed slot
Cause Corrective Action
The roll paper is warped. Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot. Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")➔P.102
(See "Clearing a Jammed Sheet.")➔P.105
The paper source selection is incorrect. Press the Load button and select the paper source.
Cannot load sheets
Cause Corrective Action
The paper source selection is incorrect. Press the Load button and select the paper source.
Paper is not cut straight
Cause Corrective Action
The paper is bent or curled at the cut Straighten out any curling by the edges of the paper.