Canon imagePROGRAF iPF8400S - Manual (Page 82)

iPF8400S Basic Guide
82
Pr
in
ter
R
elo
ca
tion
Pr
epar
ing to Tra
ns
fer
the
P
rin
te
r
8 Remove the Stand by reversing the installation procedure, when it was attached to the printer.
9 Disassemble and repackage the Stand by following the installation procedure in reverse.
10 Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package
them in a shipping box.
Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Assemble the stand
1 Referring to the Printer Stand Setup Guide,
assemble the Stand.
Caution
• The Stand must be assembled by at least two people on a flat surface. Attempting
assembly by yourself poses a risk of injury or bending the Stand.
• When assembling the Stand, lock the casters. In addition, always unlock the casters
before moving the assembled Stand. Attempting to move the stand when the casters
are locked poses a risk of injury or damage to the location site.
Install the printer
1 Mount the printer on the assembled Stand and
tighten the screws firmly.