Canon imagePROGRAF iPF8400S - Manual (Page 68)

iPF8400S Basic Guide
68
Pr
in
te
r Pa
rts
O
pera
tio
ns
and Di
sp
la
y Scre
en
First Level Second Level Third Level Fourth Level Fifth Level Sixth Level Seventh
Level
-9:Alaska(AKST) ┋-8:Oregon (PST)┋-7:Arizona(MST)┋-6:Texas (CST)┋-5:NewYork(EST)┋
-4:Santiago ┋-3:Buenos Aires┋-2:┋-1:Cape Verde
▶ Length Unit ▶ meter*┋feet/inch
▶ Detect Mismatch ▶ Pause┋Warning┋None*┋Hold Job
▶ Paper Size Basis ▶ Sht Selection 1 ▶ ISO A3+*┋13"x19"(Super B)
▶ Sht Selection 2 ▶ ISO B1*┋28"x40" (ANSI F)
▶ Keep Paper Size ▶ Off*┋On
▶ Rep.P.head Print ▶ Off┋On*
▶ Nozzle Check ▶ Frequency ▶ Standard*┋1 page┋10 pages┋Off
▶ Warning ▶ Off*┋On
▶ CarriageScanWdth ▶ Automatic*┋Fixed
▶ Use RemoteUI (*8) ▶ On*┋Off
▶ Reset PaprSetngs (*8)
▶ Erase HDD Data ▶ High Speed (*8)┋Secure High Spd. (*8)┋Secure (*8)
▶ Output Method ▶ Print*┋Print (Auto Del)┋Save: Box XX
▶ Print After Recv ▶ Off*┋On
▶ Common Box Set.
(*4) (*8)
▶ Print*┋Print (Auto Del)
▶ Show Job Log (*8) ▶ Off┋On*
Take-up Reel
(*12)
▶ Use Take-up Reel ▶ Disable*┋Enable
▶ Auto Feed (*13)
▶ Skip Take-Up Err
(*14)
▶ Off*┋On
Prep.MovePrinte
r
▶ Level 1┋Level 2┋Level 3
Admin. Menu
(*9)
▶ Change Password
(*9)
▶ (The screen for setting the password is displayed)
▶ Init.Admin.Pswd (*9)
Adj. Fine Feed (*15) (*16)
Printer Info (*15) ▶ Paper Info
▶ Ink Info
▶ Head Info ▶ ProductName:
▶ s/n:
▶ Days elapsed:
▶ Count [Mdot]:
▶ Printhead L ▶ ProductName:┋s/n:┋Days elapsed:┋Count [Mdot]:
▶ Printhead R ▶ ProductName:┋s/n:┋Days elapsed:┋Count [Mdot]:
▶ System Info
▶ Error Log
▶ Other Counter
*1: Available after you have used Standard or Initial adjustmt in Head Posi. Adj. once.
*2: Available if Adj. Priority is Automatic or Print Quality.
*3: Available if Adj. Priority is Automatic or Print Length.
*4: Not displayed if IPv4 Mode is Manual.
*5: Not displayed if NetWare is Off.
*6: Not displayed if Auto Detect is On.
*7: Follows the setting in Date Format.
*8: Viewing and configuration is possible for administrators, and only viewing for other users.
*9: Viewing and configuration is possible for administrators only.
*10:Not displayed if IPv6 Support is Off.
*11:Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12:Displayed only when the Media Take-up Unit is attached.
*13:Available ifUse Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed Auto Feed for the loaded
roll.