Canon imagePROGRAF iPF8400S - Manual (Page 33)

iPF8400S Basic Guide
33
C
ons
uma
bles
a
nd
M
ain
te
na
nc
e
In
k Ta
nk
s
5 Make sure the Ink Lamp is lit in red.
Note
• If the Ink Lamp is not lit in red, reload the tank.
6 Close the Ink Tank Cover.
Important
• After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover
cannot close, some Ink Tank Lock Lever may not be closed completely. Make sure all
ink tank lock levers are fully closed.
Load the Ink Tank (700 ml)
1 Before opening the pouch, hold the new Ink
Tank with both hands and tilt it to the left and
right as shown, shaking gently it seven or eight
times.
Caution
• 700 ml ink tanks are heavy, so use your whole arm to agitate it instead of just your wrist.
If you agitate it using just your wrist, you may injure your wrist.