Canon imagePROGRAF iPF8400S - Manual (Page 15)

iPF8400S Basic Guide
15
Handl
ing
P
ape
r
Ha
ndl
ing
r
oll
s
Note
• If any paper has been advanced that will not be used, a message is shown requesting
you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go
to the next step.
3 Open the Top Cover and lift the Ejection Guide.
4 Holding the Roll Holder so that the side with the
white gear faces the side of the Roll Holder Slot
with a white gear, load the Roll Holder shaft (a)
into the grooves (b) on both ends of the Roll
Holder Slot, fully into the slot.
Caution
• Be careful not to drop the roll and hurt yourself when loading it.
• Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide
grooves (b) when loading rolls.