Canon imagePROGRAF iPF8400S - Manual (Page 21)

iPF8400S Basic Guide
21
Handl
ing
P
ape
r
H
andli
ng shee
ts
Handling sheets
Loading Sheets in the Printer ......................................................................................................................... 21
Removing Sheets ........................................................................................................................................... 24
Loading Sheets in the Printer
Follow these steps to load sheets in the printer.
Important
• Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
• Load the paper straight. Loading paper askew will cause an error.(See "Paper loaded
askew..")➔P.140
Note
• Loading sheets when a roll is already loaded in the printer may cause jams. We recommend
removing rolls before loading sheets. (See "Removing the Roll from the Printer.")➔P.18
• To prevent the roll from unwinding if you
leave it loaded, wrap a sheet of paper around
the roll and tape it.
• Before loading sheets, make sure the printer is clean inside the Top Cover and around the
Ejection Guide. If these areas are dirty, we recommend cleaning them in advance. (See
"Cleaning Inside the Top Cover.")➔P.56
• Store unused paper in the original package, away from high temperature, humidity, and direct
sunlight.
1 Select sheets as the paper source.
• If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are
shown on the Display Screen.
Press
▲ or ▼ to select Load Paper, and then press the OK button.
• If no print job was received
1. Press the Load button.
2. Press ▲ or ▼ to select Load Cut Sheet, and then press the OK button.