Canon imagePROGRAF iPF8400S - Manual (Page 122)

iPF8400S Basic Guide
122
Tro
ubl
esho
otin
g
P
rob
lem
s w
ith t
he p
rin
tin
g q
ualit
y
Note
• The Switch only moves number 1 and the
number that matches the paper size. Set
all of the switches where the number does
not match the paper size in switches
number 2 and higher to the ● side.
7 Close the Top Cover.
The contrast becomes uneven during printing
Cause Corrective Action
The paper feed amount is out of adjustment. Adjust the feed amount.
(See "Adjusting the Feed Amount.")➔User's Guide
The type of paper specified in the printer driver
does not match the type loaded in the printer. Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")➔P.14
(See "Loading Sheets in the Printer.")➔P.21
Make sure the same type of paper is specified in the printer driver as
you have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
The length of printed images is inaccurate in the feeding direction
Cause Corrective Action
In the Control Panel menu, Adj. Priority
is set to Print Quality. Set Adj. Priority to Print Length in the Control Panel menu, and then execute
Adjust Length.
(See "Adjusting the Feed Amount.")➔User's Guide
The type of paper specified in the printer
driver does not match the type loaded in
the printer. Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")➔P.14
(See "Loading Sheets in the Printer.")➔P.21
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.