Canon imagePROGRAF iPF8400S - Manual (Page 24)

iPF8400S Basic Guide
24
Handl
ing
P
ape
r
H
andli
ng shee
ts
• If no print job was received
A menu for selection of the type of paper is shown on the Display Screen.
Press
▲ or ▼ to select the type of paper, and then press the OK button.
The printer now starts feeding the paper.
Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Types of
Paper.")➔User's Guide
• When using the Output Stacker, if you will print on large, stiff sheets, we recommend
adjusting the Output Stacker into the lowest position to prevent printed sheets from
being bent. (See "Using the Output Stacker.")➔User's Guide
Removing Sheets
Remove sheets from the printer as follows.
1 On the Tab Selection screen of the Control
Panel, press
◀ or ▶ to select the Paper tab
( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2 Press the OK button.
The Paper Menu is displayed.
3 Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4 Press ▲ or ▼ to select Yes, and then press the OK button.
The paper is ejected from the front of the printer.
5 Open the Top Cover, lift the Release Lever, and
remove the sheet.