Canon imagePROGRAF iPF8400S - Manual (Page 59)

iPF8400S Basic Guide
59
C
ons
uma
bles
a
nd
M
ain
te
na
nc
e
C
le
an
in
g t
he
P
rint
er
Note
• By default, nozzles are checked at fixed intervals.
Configure the settings on the Control Panel menu in Nozzle Check.
(See "Menu Settings.")➔User's Guide
Perform cleaning as follows.
1 On the Tab Selection screen of the Control
Panel, press
◀ or ▶ to select the Settings/Adj.
tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2 Press the OK button.
The Set./Adj. Menu is displayed.
3 Press ▲ or ▼ to select Maintenance, and then press the OK button.
4 Press ▲ or ▼ to select Head Cleaning, and then press the OK button.
5 Press ▲ or ▼ to select Head Cleaning A or Head Cleaning B, and then press the OK button.
Head cleaning is now executed.
6 Print a test pattern to check the nozzles, and determine whether cleaning has cleared the
nozzles. (See "Checking for Nozzle Clogging.")➔User's Guide