Canon imagePROGRAF iPF8400S - Manual (Page 138)

iPF8400S Basic Guide
138
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pa
per
Cause Corrective Action
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
The roll is empty.
Cause Corrective Action
The roll is
empty. Follow these steps to replace the used roll with a new roll of the same type and size.
1. Lift the Release Lever and remove the roll.
(See "Removing the Roll from the Printer.")➔P.18
(See "Removing Rolls From the Roll Holder.")➔User's Guide
2. Load the new roll.
(See "Attaching the Roll Holder to Rolls.")➔P.12
(See "Loading Rolls in the Printer.")➔P.14
3. If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")➔User's Guide
4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not
printed on the roll, also specify the paper length.
(See "Specifying the Paper Length.")➔User's Guide
5. If Not finished printing. Finish printing remaining jobs? is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
There is
remaining roll
paper, but
because it
could not be
advanced, it
could not be
detected.
• If
the
trailing
edge of the
paper is
taped to the
roll paper
core
The paper was not advanced because the trailing edge is taped to the roll paper core.
Remove the used roll paper and insert a new roll paper.
(See "Removing the Roll from the Printer.")➔P.18
(See "Removing Rolls From the Roll Holder.")➔User's Guide
(See "Loading and Printing on Rolls.")➔User's Guide
There is
remaining roll
paper, but
because it
could not be
advanced, it
could not be
detected.
• If
the
unused
portion of
the roll
paper is
heavy and
is placing a
burden on
the printer
The paper was not advanced because the unused portion of the roll paper is heavy and is placing a
burden on the printer.
It may be helpful to change the printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")➔User's Guide