This paper cannot be used as size is not supported, Roll printing is selected, Roll printing is selected, but sheets are loaded – Canon imagePROGRAF iPF8400S User Manual

Page 137

Advertising
background image

iPF8400S Basic Guide

137

Er

ror M

essa

ge

Me
ssa
ges
r

egar
ding
pa

per

Cause

Corrective Action

paper for the print job, and then printt.
When using the Media Take-up Unit, press

or

▼ to select Stop Printing, and then press

the OK button to stop printing.
Remove the printed document from the Media
Take-up Unit, replace the roll with a roll that
has enough paper for the print job, and then try
printing again.
(See "Removing the Roll from the Printer.")➔
P.18
(See "Loading Rolls in the Printer.")➔P.14
(See "Removing Printed Documents from the
Media Take-up Unit (Optional).")➔User's
Guide

Press

▲ or ▼ to select Stop Printing or press

the Stop button to stop printing.

This paper cannot be used as size is not supported.

Cause

Corrective Action

Paper that is too large for the printer has been loaded.

Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")➔User's Guide

Paper that is too small for the printer has been loaded.

Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")➔User's Guide

Paper has been loaded that is too small to print the test
pattern for printhead adjustment or nozzle checking.

Lift the Release Lever and load unused paper A4/Letter
(vertical) or larger. More than one sheet may be required
depending on the adjustment.

Roll printing is selected.

Cause

Corrective Action

You have attempted to print on a
roll, but no roll is loaded.

Press

▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the

roll, and then print.
(See "Attaching the Roll Holder to Rolls.")➔P.12
(See "Loading Rolls in the Printer.")➔P.14

Press

▲ or ▼ and select Stop Printing or press the Stop button to stop printing.

Roll printing is selected, but sheets are loaded.

Cause

Corrective Action

A print job for rolls was received
when a sheet is loaded.

Follow these steps to load and print on a roll.
1. Press

▲ or ▼ to select Eject Paper, press the OK button, and remove the

sheet.
(See "Removing Sheets.")➔P.24

2. Load a new roll.

(See "Loading Rolls in the Printer.")➔P.14

Advertising