Canon imagePROGRAF iPF8400S User Manual
Page 47
iPF8400S Basic Guide
47
C
ons
uma
bles
a
nd
M
ain
te
na
nc
e
C
ut
te
r
Un
it
4
Holding the Cutter Unit by the Lock Lever (a)
and grip (b), remove it from the Carriage.
Caution
• Never touch any part of the Cutter Unit except the Lock Lever (a) and grip (b). This may
stain your hands or cause injury. Additionally, this may damage the printer.
• Do not disassemble the Cutter Unit. Touching the blade may cause injury.
Note
• Dispose of the used Cutter Unit in accordance with local regulations.
5
Holding the new Cutter Unit by the Lock Lever (a) and grip (b), insert it on the Carriage until it
clicks into place (c).
Important
• After installing the Cutter Unit, hold it only by the grip (b) and pull the Cutter Unit forward
to make sure it does not come off. It may damage the printer if the Cutter Unit comes
off.