Canon imagePROGRAF iPF8400S - Manual (Page 81)

iPF8400S Basic Guide
81
Pr
in
ter
R
elo
ca
tion
Pr
epar
ing to Tra
ns
fer
the
P
rin
te
r
4 Grasp the Belt, insert it between the Belt
Stopper, and affix the Belt Stopper with a hex
screw at the position indicated.
Important
• Here, the Belt Stopper is the one that was removed and stored after initial installation.
Neglecting to attach the Belt Stopper may damage the printer.
• Do not touch the Linear Scale (a),
Carriage Shaft (b), or Fixed Blade (c).
This may stain your hands and damage
the printer.
5 Close the Top Cover.
6 Tape down printer covers to secure them, in the reverse order of tape removal during installation.
7 Remove the Output Stacker by reversing the installation procedure.