Stopping and restarting external arrays – HP XP Data Shredder Software User Manual
Page 121
6 Troubleshooting NAS Blade
systems that include external
arrays
If your local array is provided with a NAS package, you can configure the NAS Blade system that
includes an external array. This chapter describes procedures to stop the external array for maintenance
and recover the external array from a failure.
For more information about each procedure, see the following manuals:
•
For NAS Blade Manager, see the NAS Blade Manager User's Guide.
•
For NAS Sync Image, see the NAS Sync Image User's Guide.
•
For Business Copy XP, see the HP StorageWorks Business Copy XP user guide for the
XP12000/XP10000/SVS200.
•
For LUN Manager, see the HP StorageWorks LUN Configuration and Security Manager XP user
guide for the XP12000/XP10000/SVS200.
•
For Continuous Access XP, see the HP StorageWorks Continuous Access XP user guide for the
XP12000/XP10000/SVS200.
Stopping and restarting external arrays
shows an example of a NAS Blade system configuration that includes an external array. The
procedures to stop the external array for maintenance and restart the external array after maintenance to
restore the NAS Blade system are described below, referring to
External Storage XP user guide
121