HP XP Data Shredder Software - Manual (Page 58)

a. Double-click the SLPR.
b. Select the CLPR that you want to assign the external storage groups from (this will be CLPR0 if
this is the first time you are configuring partitioning).
c. Select and right-click the external storage groups that you want to assign to another CLPR, and
then select Cut ( Figure 25 ).
Figure 25 Partition Definition pane, Cut option
d. Right-click the CLPR that you want to assign the selected external storage groups to, and
then select Paste Parity Group ( Figure 26 ). The selected external storage groups are added
to the CLPR resource list.
58 Managing cache with external storage