HP XP Data Shredder Software - Manual (Page 75)

When selected, displays ports designated as an RCU target (receiving) port (used for Continuous
Access XP, TrueCopy for z/OS, Continuous Access XP Journal, Universal Replicator for z/OS, and
so on).
• Initiator/External
When selected, displays ports for which the Initiator/External MIX mode is set.
• Port number
Displays ports assigned to each port attribute in the branch below each port attribute. External Storage
XP uses ports set to external. One of the following icons appears on the left of each port number:
Icon Description
Port in Standard mode.
Port in High Speed mode.
Port in Initiator/External MIX mode.
Port Operation list
Displays ports in the local array that External Storage XP can use or set. The port information displayed
corresponds to the item selected in the Port tree.
You can sort the list by attribute. For example, to sort by port numbers, click Port on the list.
Rows corresponding to ports that are about to be acted upon appear in the Preset list, and the
corresponding row in the Port Operation list appears in blue italics.
Figure 39 Port Operation list
•
Port
Port number. One of the following icons appears for each port:
Icon Description
Port in Standard mode.
Port in High Speed mode.
Port in Initiator/External MIX mode.
• Attribute
Port attribute. External ports are used for connecting to the external array. To set a remote command
device, you can use the port for which the Initiator/External MIX mode has been set.
• PCB Mode
Port's PCB mode. Standard, High Speed, or MIX (for Initiator/External MIX mode) appears.
External ports do not have High Speed mode. For more information about the PCB mode,
see the HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200. For more information about the Initiator/External MIX mode, see Using
Continuous Access XP or Continuous Access XP Journal with remote command devices .
• FLI_TOV (Fabric Login Timeout Value)
External Storage XP user guide 75